H12–831_V1.0 HCIP-Datacom-Advanced Routing & Switching Technology V1.0 Exam Questions

Karon Bill
3 min readNov 30, 2021

H12–831_V1.0 is a sub-direction exam of HCIP-Datacom-Advanced Routing & Switching Technology Certification, you also need to pass core exam H12–821_V1.0 HCIP-Datacom-Core Technology V1.0 to earn this certification. PassQuestion new cracked H12–831_V1.0 HCIP-Datacom-Advanced Routing & Switching Technology V1.0 Exam Questions that you can use to prepare for the real H12–831_V1.0 exam.Our H12–831_V1.0 HCIP-Datacom-Advanced Routing & Switching Technology V1.0 Exam Questions will help you to understand these topics and obtain required skills & knowledge essential to pass the H12–831_V1.0 exam successfully.

HCIP-Datacom-Advanced Routing & Switching Technology V1.0

Passing HCIP-Datacom-Advanced Routing & Switching Technology V1.0 certificate indicates that you are competent for the position of network engineer in a medium-or large-sized enterprise, be capable of planning and designing, deploying and maintaining, and locating faults on a medium-or large-sized enterprise network by using Huawei datacom devices, and design solutions with high security, availability, and reliability for network applications.It is recommended that you learn HCIA-Datacom in advance.

Exam Information

Authentication Name: HCIP-DatacomAdvanced Routing & Switching Technology
Exam Code: H12–831
Exam Name: HCIP-DatacomAdvanced Routing & Switching Technology V1.0
Language: CHS/ENU
Exam fee: 180 USD
Exam Duration: 90min
Passing Score/Total Score: 600/1000

Exam Content

The HCIP-Datacom-Advanced Routing & Switching Technology V1.0 exam covers advanced routing and switching knowledge in the data communication field, including advanced IGP features, advanced BGP features, IPv6 routing, advanced Ethernet technologies, MPLS technologies, Network O&M, Network Troubleshooting, and Network Cutover.

  • Advanced IGP Features 17%
  • Advanced BGP Features 10%
  • IPv6 Routing 20%
  • Advanced Ethernet Technologies 10%
  • MPLS Technologies 19%
  • Network O&M 7%
  • Troubleshooting 10%
  • Network Cutover 7%

View Online HCIP-Datacom-Advanced Routing & Switching Technology V1.0 H12–831_V1.0 Free Questions

In order to speed up the sensing speed of link failures in the IS-IS network, IS-IS can be linked with BFD.
A. TRUE
B. FALSE
Answer: A

Which of the following statements about IPSG is wrong?
A. IPSG can prevent IP address spoofing attacks
B. IPSG is a source IP address filtering technology based on the three-layer interface
C. IPSG can turn on the IP packet inspection and alarm function, and cooperate with the network management to perform alarms
D. IPSG can prevent the host from changing the IP address privately
Answer: B

Which of the following information can the DHCP binding table contain? (Multiple choice)
A. Port and UDP port
B. MAC address
C. IP address
D. Lease time
Answer: BCD

Configuring DHCP Snooping can be used to prevent imitators from attacking. Which of the following steps should be included in the configuration process? (Multiple choice)
A. Enable the global DHCP Snooping function
B. Enable global DHCP function
C. Configure interface trust status
D. Enable DHCP Snooping on the interface or VLAN
Answer: ABCD

Which of the following are the advantages of VLAN aggregation? (Multiple choice)
A. Reduce the waste of IP addresses
B. Increased the number of available MLANs
C. Increased flexibility of addressing
D. Realize the isolation of broadcast domains between Sub-VLANs
Answer: AD

Which of the following statements about 1S-IS (IPv6) is correct? (Multiple choice)
A. To support the processing and calculation of IPv6 routing, IS-IS added NLPID to 129 TLV
B. IS-IS working at the data link layer only needs to add a new TLV to support Pv6
C. To support the processing and calculation of IPv6 routes, IS-IS has added TLV232236
D. By default, IS-IS enables the multi-topology feature
Answer: ABC

Which statements are wrong about OSPF Router LSA and Network LSA? (Multiple choice)
A. The router running DSPF must generate Network LSA
B. Routers running OSPF must generate Router LSA
C. There must be both Router LSA and Network LSA in the OSPF network
D. Network LSA carries both topology and routing information
Answer: AC

After the cutover is completed, which items generally need to be checked? (Multiple choice)
A. Software version
B. Physical topology
C. Data flow
D. Control plane entries
Answer: CD

--

--